How to seal the rubber bag? It’s so easy, so get started

How to seal the rubber bag? It’s so easy, so get started. Here’s a good way to do it quickly, and it’s practical.

1: Sealing method of rubber bag

There are many ways to seal rubber bags. Here we will introduce several common sealing methods. 1. Direct sealing: In this case, the rubber bag is sealed together, and only one opening is needed when using the bag; 2. Indirect sealing: In this case, the rubber bag is packed through a container made of special materials, rather than directly sealed; 3. Pressure sealing: In this case, the space formed by the compression of the rubber bag is sealed in the form of a certain air pressure, and then separated by pipes or other equipment; Here are neoprene bag. 4. Steam sealing: in this case, the rubber bag will produce a lot of gas, using this method can make the rubber bag isolated from the outside world; 5. Water seal: In this case, the rubber bag is sealed in a film, when the water evaporation or external force will be immediately released.

2: What are the joint methods made of different materials?

What are the joint methods made of different materials? 1. Rubber bag: made of high quality natural rubber, with good elasticity and wear resistance. 2, flexible hose: made of hard polyurethane resin, non-toxic, tasteless, corrosion resistance, not easy to aging.3, glue stick: made of high strength polyamide plastic, high temperature and high pressure resistance, high compressive strength, long life. 4, flange: made of heat-resistant metal steel sheet, has good impact resistance, can withstand pressure up to 30MPa above; Easy to install and maintain. 5, pipe: made of copper or stainless steel, surface after oxidation treatment, anti-corrosion effect is obvious. 6, other seals: such as oil seal gasket and other commonly used sealing materials.

3: How to choose the right sealant?

Sealant is a special rubber material used to hold things together. It can well protect objects from harmful substances in the external environment. Different types of sealant have their own unique features. Normally, a complete sealant system includes packaging, sealing and sealing rings. When glue is used, each component must be properly attached to the other. If the glue does not attach effectively, it may cause water leakage or damage to the object. Therefore, it is very important to choose the right sealant. First, what do you want to protect? This is the first step. Then, select some special materials as needed, such as nylon, silicone or rubber diaphragm to make sealant. Finally, determine the required dimensions and ensure that the bolts fit well into the pipe wall. Once the appropriate film has been selected, it is time to prepare for welding.

If you want to make your sealant even stronger, learn this new sealing method! Doing so will make your product easier to open and use.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top